Monnit Enterprise is available for large organizations with specific data/usage requirements. It provides the same feature set as the iMonnit Premiere online software but allows the organization to host and maintain their own sensor data.
The ALTA Wireless Local Alert provides three ways to notify people about critical changes and sensor readings from your Monnit IoT network. The Local Alert flashes a red LED, sounds an audible alarm, and displays the important message upon receiving a notification. The Local Alert can also display sensor readings from any sensor on the same account.
Monnit's Commercial Refrigeration Temperature Monitoring kit is perfect for ensuring complete peace of mind when it comes to temperature tracking and monitoring in commercial refrigeration systems. This affordable, easy-to-use kit includes everything you need to simplify temperature monitoring in your cold stores and commercial freezers.
Monnit's Wireless Control allows a user to control two separate power relays, all through the iMonnit online sensors portal. Automatically control motors or electrical devices when a condition is detected by a sensor or group of sensors
These sensors track the minimum, maximum, and average RMS current, as well as amp hours. If power consumption spikes or plummets beyond user-defined limits, an alert is sent via text, email, or call.
This sensor allows you to remotely monitor potential differences (voltage) between two electrical points. If voltage deviates from your pre-set limits, you’re alerted by email, text, or call.
Upon pressing the sensor’s button, a notification is sent to iMonnit software. An on-sensor LED confirms software response, and an alert is issued via text, email, or call.
Monnit’s Wireless G-Force Snapshot Sensor activates at a user-set time to measure acceleration on the X, Y, and Z axes to determine G-force. This digital, low-power sensor’s applications include tracking machine inclination or tilt, detecting asset orientation, or testing for vibrations.
The Monnit Light Meter uses a highly sensitive photo-diode to detect and measure the intensity of light around the device. If changes to the lighting are detected an alert via email or text will be sent in real time.
Monnit Enterprise Wireless Pulse Counters, offering accurate detection of passive and active pulses. Connect seamlessly to multiple devices and log events on both pulse edges. Choose single or dual input models to enhance your monitoring efficiency and streamline operations.
Better understand your operations, machine health, or structure status by collecting inclination data or tracking pitch and roll with Monnit’s Enterprise Tilt Sensors.
Monnit’s Ultrasonic Sensors can be used in various applications to measure distances between the sensor and objects in its path. These sensors are impervious to target surface and colour and feature autocalibration algorithms which allow them to adapt to variable environmental conditions and compensate for temperature and humidity effects.
The sensor detects when water is present by completing the circuit between the two wires at the end of the water detection lead. When the detection state changes the sensor will immediately turn on the RF radio and transmit the data to allow the user to receive a notification
When liquid makes contact with the sensor’s conductive polymer rope, the sensor transmits this data resulting in an alert in real time via text, call, or email.
Keep tabs on your indoor environment with the Monnit Indoor Temperature or RH Monitoring kit. This comprehensive and efficient kit provides everything you need to start monitoring temperatures or temperatures & humidity in offices, buildings, fridges, commercial storage, and cold stores.
These sensors provide insights on machine health or system performance via current usage. If power consumption spikes or plummets beyond user-defined limits, an alert is sent via text, email, or call.
Detect if contact is made or broken between two wired points. Be alerted via email, text, or call if a contact is broken or if the two points make contact when they shouldn’t be.
These devices accurately measure ductwork temps while maintaining a sealed environment. If temps spike or fall beyond your preset limits, the sensors alert you via email, text, or call.
Monnit’s Wireless G-Force Snapshot Sensor activates at a user-set time to measure acceleration on the X, Y, and Z axes to determine G-force. This digital, low-power sensor’s applications include tracking machine inclination or tilt, detecting asset orientation, or testing for vibrations
Monnit’s High Temperature Sensor uses a glass coated platinum RTD sensor to accurately measure temperatures from -50°C to +370°C. A temp swing will trigger a sensor alert via email or text in real time.
Monnit’s Industrial Humidity Sensors remotely monitor RH with a +/- 3% accuracy and will notify in real time if the humidity exceeds your specified limits.
The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors.
These light meters have a measurement range of 0–83,000 lux (indoor range) that spans from moonlit nights to full daylight. If lux measurements move outside of user-set limits, these meters alert users via text, email, or call for correction
Monnit Industrial Wireless Pulse Counters, offering accurate detection of passive and active pulses. Connect seamlessly to multiple devices and log events on both pulse edges. Choose single or dual input models to enhance your monitoring efficiency and streamline operations.
Use the Monnit Industrial Standard Temperature wireless Sensor (-40 to +125°C) to protect equipment, inventory, and personnel. When the temperature exceeds preset thresholds, these sensors issue notifications in real time.
Collecting inclination data or tracking pitch and roll with Monnit’s Enterprise Tilt Wireless Sensors to better understand operations and machine health
Machine operators and facility managers have a second set of eyes in Monnit’s Voltage Detection Wireless Sensors. This wireless voltage sensor tracks power sources or monitors the on/off status of equipment and machines, as well as battery levels.
Monnit’s 0–200 VDC or 0–500 VAC sensors measure the voltage between two electrical points, such as batteries or other sensors and measure the reported voltage.
The sensor detects when water is present by completing the circuit between the two wires at the end of the water detection lead. When the detection state changes the sensor will immediately turn on the RF radio and transmit the data to allow the user to receive a notification
When liquid contacts the sensor’s conductive polymer rope, the sensor instantly activates its onboard RF radio and transmits water presence data to the iMonnit Sensor Configuration and Management software and facilitates a near-instantaneous text, call, or email alert.
The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform (commercial only) with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors.
Monnit MOWI Wi-Fi Sensors monitor Humidity and send the data wirelessly via your Wi-Fi to the iMonnit Cloud Database where you can view Graphs and data on line and receive alerts should any parameter breach.
The Monnit Wi-Fi programming cable allows you to connect your MoWi sensors to your PC via USB connection for initial configuration and Wi-Fi security setup via the MoWi Sensor Setup Utility.
Monnit’s Humidity Sensors monitor RH with a +/- 3% accuracy (between 10–90% RH), temperature, and dew point in facilities or enclosures. If the humidity exceeds your specified limits, these scientific-grade sensors instantly alert you via text, email, or call for swift correction.
Monnit’s Wireless Dry Contact Sensors detect if contact is made, or broken, between two wired points. This sensor remotely monitors production line operation, tracks when a forklift’s seat is occupied, or alerts you if a gate was left open.
Monitor movement by people or animals in virtually any area or facility. The passive infrared (PIR) ALTA Motion Detection Sensors help you increase security, coordinate building occupancy services and space booking, and safeguard critical assets and equipment by recording heat signals.
Monnit’s sensor uses an external magnetic switch and trigger magnet to detect status—when the magnets meet, a door or window is closed. Get an alert via text, email, or call if something’s been left ajar or has been accessed when it shouldn’t be.
Monnit’s hardwired thermocouples feature a needle-style probe at the end of a 6’ lead. Users benefit from a wireless data transmission range of 1,200+ ft, bank-grade security, and a temperature range of up to 400°C (752°F).
Every Detect Plus sensor has a probe-capped 3’ lead. Upon water contact, the probe’s electrical circuit closes to trigger an alert. The Detect Plus probe helps minimise false alarms when mounted to compensate for expected variables, e.g., condensation.
You can deploy these devices in restrooms above your server room, below leak-prone boilers or in attics. They are also ideal for high-traffic walkways where standing water threatens safety.
The ALTA® Wireless Sensor Adapter enables Monnit Wireless Sensors to communicate with your local or online wireless sensor monitoring system by connecting to a PC or third-party IoT gateways via USB connection. Suitable for Monnit Express Software
This glass bead filled plastic vial will buffer any momentary fluctuations in temperatures. The 3mm glass beads will slow the response time of the temperature sensor allowing more accurate temperature data to be captured and prevent false alerts from being sent.
The Industrial Wireless Three Phase Current Meter (20A, 150A & 500A) measures the RMS current of an alternating current (AC) system using 3 current transducers (CTs) that wrap around the wires of a three-phase power system.
This mount-and-monitor device measures Particulate Matter that’s coarse (PM10), fine (PM2.5), and ultrafine (PM1) inside mines, production facilities, commercial kitchens and facilities, as well as business buildings.
This sensor measures the pressure difference between its two ports, accounts for ambient temperature and altitude, and determines system airflow speed in meters per second (m/s).
This air velocity/speed sensor measures the pressure difference between its two ports, accounts for ambient temperature and altitude, and determines system airflow speed in meters per second (m/s).
Remotely monitor RH with a +/- 3% accuracy (between 10–90% RH), temperature, and dew point in facilities or enclosures. If the humidity exceeds your specified limits, these scientific-grade sensors instantly alert you via text, email, or call for swift correction
The Monnit Digital Temperature Sensor measures the ambient temperature based on a user-configurable time interval or Heartbeat. The temperature is also shown on the digital display when you press the Read button.
The Activity Sensors can be used in a host of applications where detecting vibration (sudden movement) or counting the number of vibrations is required.
This sensor uses an accelerometer to capture g-force on all axes and then calculates vibration, frequency, and crest factor from that acceleration data.
The Industrial Wireless Advanced Vibration Meters use a tri-axis accelerometer and temperature sensor to monitor system vibration health. Capture data from machines, processes, and critical infrastructure. When excessive vibration, jarring harmonics, or abnormal motion detected, an alert is issued in real time via text, email, or call.
The MonnitLink Ethernet gateway allows your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC
This broad-spectrum vibration meter can determine if a fence is swaying in the wind or vibrating as it’s being scaled. It can also detect irregularities in assembly lines, motors, and wind turbines.
The G-Force Max/Avg Wireless Accelerometer reports the maximum and average g-force levels that occur on X, Y, Z, and combined axes in-between sensor heartbeats.
CO2 concentration provides insight into facility ventilation quality and HVAC calibration. Greenhouses and modern grow spaces also rely on CO2 sensor data to optimize crop growth.
Maintain wellness and productivity with the Monnit Wireless CO2 Sensor below.
The Site Survey Tool tells you the Sensors’ radio signal performance before you install them. Using the tool, you can know the places in your facility or your site where the signal is optimal for your IoT network.
Compatible with the Monnit Food Probe Wireless Sensor, this probe features a highly ergonomic T-handle, with a temperature measurement range of -40.0°C to 246.0°C (-40°F to 475.0°F), at the end of a 48-inch lead.
Monnit’s High-temp Sensors remotely monitor commercial ovens, heaters, furnaces, boilers, and other can’t-fail applications with a -50°C to +370°C (-58°F to +700°F) temperature range. A temp swing will trigger a sensor alert for you in real-time via email, text, or call.
Monnit’s Industrial PAR Light Wireless Meter monitors this spectral range (389 to 692 nanometres) from indoor and outdoor light sources, including LEDs.
These devices accurately measure ductwork temps while maintaining a sealed environment. If temps spike or fall beyond your preset limits, the sensors alert you (or on-site maintenance techs) via email, text, or call.
Monnit’s Power over Ethernet (PoE) Temperature Monitoring Solutions are available in Standard, High, Low and Duct sensors ranging in temperatures from -200°C to 0°C (-328°F to 32°F) to -50°C to 370°C (-58°F to 700°F).
Detect if contact is made or broken between two wired points. Ideal for monitoring tank level, physical access security, mechanical actuation, and equipment use.
Remotely monitor gas, liquid, or vapor line pressures up to 300 pounds per square in gauge (PSIG). It provides precise performance over the entire line pressure.
Remote temperature monitoring continues to be the most popular Internet of Things (IoT) solution across many use cases. Global enterprises trust Monnit Standard Temperature Sensors to protect equipment, inventory, and personnel.
Monnit’s Enterprise Wireless 5-Input Dry Contact Sensors offer precise detection of contact between various wired points. Operating with five input wires and one ground wire, they seamlessly integrate into switches, promptly transmitting data to the gateway for secure forwarding. Configurable for closed and open loops, they provide real-time alerts for contact changes.
Monnit’s Industrial Wireless 5-Input Dry Contact Sensors are designed for harsh environments, offering robust detection capabilities for various contact points. With a sturdy cable length of 0.9 m (3') and bare-wire terminations, these sensors seamlessly integrate into industrial settings. They excel at identifying contact changes and provide immediate alerts for enhanced operational efficiency.