CS Instruments FA 500 - Dew point sensor (-80°C to 20°C)

Manufacturer:

FA 500 is the ideal dew point sensor with integrated display and alarm relay for refrigeration, membrane and desiccant driers.

Part Number: FA 500

Back to Previous Page

Product Files

Call for pricing

FA 500 is the ideal dew point measuring instrument with an integrated display and alarm relay for refrigeration, membrane and adsorption dryers

Special Features:

NEW: Modbus-RTU interface
NEW: Higher resolution of sensor signal caused by the improved evaluation electronics
NEW: Sensor diagnosis on site with a portable device or CS Service Software Integrated display
Threshold value adjustable via keypad alarm relay (max. 60 VDC, 0,5 A)
Pressure-tight up to 350 bar (special version)
Extreme long-term stability
Quick response time
4...20 mA analogue output
2 versions: Refrigeration driers and desiccant driers

The integrated display shows the dew point in big figures as well as further humidity parameters on two more display pages. By means of the arrow key it can be browsed between the display pages.
The alarm threshold value for the integrated relay can be entered via the keys. Apart from the alarm threshold it is also possible to enter the hysteresis freely.
The 4...20 mA analogue output can be scaled freely resp. also allocated to one further parameter, e.g. g/m³.
If requested the sensor can also reckon back from the measured pressure dew point to the atmospheric dew point upon entering the system pressure of the compressed air plant and the reference pressure (atmospheric pressure).

Technical Information
Measuring range	-80…20 °Ctd, -60… 30 °Ctd, -20…50 °Ctd, or 0…100% RH
Accuracy	± 1 °C at +50…-20 °Ctd ± 2 °C at -20…-50 °Ctd ± 3 °C at -50…-80 °Ctd
Pressure range	-1…50 bar Special version up to 500 bar
Power supply	24 VDC (10…36 VDC)
Protection class	IP 65
EMC	In acc. with DIN EN 61326-1
Operating temperature	-20…50 °C
Connection	2 x M12, 5-pin for analogue output, Modbus-RTU and alarm output, M-Bus (optional) Ethernet (PoE) (optional)
PC connection	Modbus-RTU interface (RS 485)
Output: (3-wire)	4…20 mA = -80…20 °Ctd 4…20 mA = -60…30 °Ctd 4…20 mA = -20…50 °Ctd
Burden for analogue output	< 500 Ω
Alarm relay	NC, max. 60 VDC, 0.5 A
Screw-in thread	G 1/2″
Dimensions housing	76.5 x 85 x 75 mm (WxHxD)

FA 500 is the ideal dew point measuring instrument with an integrated display and alarm relay for refrigeration, membrane and adsorption dryers

NEW: Modbus-RTU interface
NEW: Higher resolution of sensor signal caused by the improved evaluation electronics
NEW: Sensor diagnosis on site with a portable device or CS Service Software Integrated display
Threshold value adjustable via keypad alarm relay (max. 60 VDC, 0,5 A)
Pressure-tight up to 350 bar (special version)
Extreme long-term stability
Quick response time
4...20 mA analogue output
2 versions: Refrigeration driers and desiccant driers

The integrated display shows the dew point in big figures as well as further humidity parameters on two more display pages. By means of the arrow key it can be browsed between the display pages.
The alarm threshold value for the integrated relay can be entered via the keys. Apart from the alarm threshold it is also possible to enter the hysteresis freely.
The 4...20 mA analogue output can be scaled freely resp. also allocated to one further parameter, e.g. g/m³.
If requested the sensor can also reckon back from the measured pressure dew point to the atmospheric dew point upon entering the system pressure of the compressed air plant and the reference pressure (atmospheric pressure).