Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Search
Menu Close

Monnit Vaccine Fridge Temperature Monitoring Solution

Manufacturer:
Everything you need to start monitoring the temperature of Vaccine Refrigerators wirelessly and remotely.
Part Number: Medical Refrigeration Kit
*
*
*
*
*
Back to Previous Page
$0.00 ex GST
i h

A Vaccine Monitoring and Recording system with wireless temperature sensors and a cloud-based operating system accessed via any web browser or smartphone.


This kit gives you a simple solution to monitor your assets 24/7 with no complicated wiring or setup. With battery-powered wireless temperature sensors, a Gateway receiver to send the data to the cloud and your own web-based software site.

The system is supplied fully configured and ready to go, just place the sensors in your fridges and plug in the Gateway.

The iMonnit web-based software allows you to configure the sensors, set notifications, Monitor the sensor system and temperatures, send SMS or email alerts should something not be right and gives you a historical graphing system for viewing your data. See the software

Adding more sensors is extremely simple and can be done at any time. These include not only temperature but a large selection for almost everything you wish to monitor. See our sensors HERE


Contents of the ALTA Medical Refrigeration Monitoring Kit:

  • 1 - ALTA Wireless Gateway 4G (MNG2-4-LTE-CCE-ND) or Ethernet (MNG2-4-EGW-CCE), (the 4G version includes 12 months Telstra mobile data)
  • ALTA Wireless Temperature Sensors With 3 Foot Probes (AA) (MNS2-4-W2-TS-ST-L03)
  • Optional Glass bead sensor buffers (MNA-TB-GB)
  • iMonnit Software, Premiere version.
  • Optional packs of SMS Credits (100 credits = 50 SMS messages) (MNW-NC-100)
  • HX Credits to upgrade the logging speed from 10min to 5min to meet Australian standards. See HX calculator here
  • Fully configured and ready to go, just place the sensors in your fridges and plug in the Gateway.
  • Free delivery to anywhere in Australia


More information on each item can be found by following these links


Important Notes:

  • iMonnit Portal Plan included in this system is for 12 months from day of purchase. At the end of the plan we'll contact you to continue with premiere for a small 12 monthly fee.
  • SMS credits are sold in a pack of 100 credits, each SMS in Australia and NZ is at a cost of 2 credits, (50 SMS's per pack). The system can be set to notify you when credits reach a desired low level and purchasing another pack can be done through OneTemp.
  • The 4G Gateway is supplied with a SIM card fitted and activated on the Telstra Mobile network (Aust) and Spark (NZ) for 12 months. A reminder will be sent to you on the iMonnit account administrators email address at 11 months for renewing this plan for a further 12 months.
  • HX Credits are required for 5 min logging intervals. They do not roll over and continue until used, at that time you will be notified and can purchase more as required.

ALTA - Leading Enterprise Grade "Internet of Things" Solutions

ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,200+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 12+ years.

ALTA products employ Monnit's new Encrypt-RF® Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage.Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.


Installing a Monnit Temperature Sensor

This video explains the basics of installing Monnit Temperature Sensors.
Adding the Temperature Sensor to iMonnit - 00:43
Mounting the sensor - 00:54
Sensor settings in iMonnit - 1:16



Basic iMonnit Actions for Refrigeration Systems

This video walks you through creating actions for sensors in a Refrigeration System within iMonnit.



Need further assistance with your Monnit Device?


Contact us on 1300 768 887 or visit Monnit's website for additional helpful resources

A Vaccine Monitoring and Recording system with wireless temperature sensors and a cloud-based operating system accessed via any web browser or smartphone.


This kit gives you a simple solution to monitor your assets 24/7 with no complicated wiring or setup. With battery-powered wireless temperature sensors, a Gateway receiver to send the data to the cloud and your own web-based software site.

The system is supplied fully configured and ready to go, just place the sensors in your fridges and plug in the Gateway.

The iMonnit web-based software allows you to configure the sensors, set notifications, Monitor the sensor system and temperatures, send SMS or email alerts should something not be right and gives you a historical graphing system for viewing your data. See the software

Adding more sensors is extremely simple and can be done at any time. These include not only temperature but a large selection for almost everything you wish to monitor. See our sensors HERE


Contents of the ALTA Medical Refrigeration Monitoring Kit:

  • 1 - ALTA Wireless Gateway 4G (MNG2-4-LTE-CCE-ND) or Ethernet (MNG2-4-EGW-CCE), (the 4G version includes 12 months Telstra mobile data)
  • ALTA Wireless Temperature Sensors With 3 Foot Probes (AA) (MNS2-4-W2-TS-ST-L03)
  • Optional Glass bead sensor buffers (MNA-TB-GB)
  • iMonnit Software, Premiere version.
  • Optional packs of SMS Credits (100 credits = 50 SMS messages) (MNW-NC-100)
  • HX Credits to upgrade the logging speed from 10min to 5min to meet Australian standards. See HX calculator here
  • Fully configured and ready to go, just place the sensors in your fridges and plug in the Gateway.
  • Free delivery to anywhere in Australia


More information on each item can be found by following these links


Important Notes:

  • iMonnit Portal Plan included in this system is for 12 months from day of purchase. At the end of the plan we'll contact you to continue with premiere for a small 12 monthly fee.
  • SMS credits are sold in a pack of 100 credits, each SMS in Australia and NZ is at a cost of 2 credits, (50 SMS's per pack). The system can be set to notify you when credits reach a desired low level and purchasing another pack can be done through OneTemp.
  • The 4G Gateway is supplied with a SIM card fitted and activated on the Telstra Mobile network (Aust) and Spark (NZ) for 12 months. A reminder will be sent to you on the iMonnit account administrators email address at 11 months for renewing this plan for a further 12 months.
  • HX Credits are required for 5 min logging intervals. They do not roll over and continue until used, at that time you will be notified and can purchase more as required.