Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Menu
Search
Search Our Catalogue Close
Shopping cart Close
Menu Close
All Categories

    Monnit Enterprise Air Particulate Wireless Meter

    Manufacturer:
    This mount-and-monitor device measures Particulate Matter that’s coarse (PM10), fine (PM2.5), and ultrafine (PM1) inside mines, production facilities, commercial kitchens and facilities, as well as business buildings.
    Part Number: MNS2-4-W2-AQ-P25A-LPO
    Back to Previous Page
    Product Files
    $903.00 ex GST
    i h

    Particulates matter, monitor them

    Monnit’s Wireless - PM2.5 um Meter measures PM1, PM2.5 and PM10 concentrations in the air and transmits the measurement to iMonnit. Elevated levels of PM10 (2.5-10 um) particle pollution irritate the respiratory tract and eyes; smaller PM2.5 (1.0-2.5 um) particles can penetrate deep into the lungs. As the most dangerous of all, PM1 (0.3-1.0 um) can slip through the lungs and penetrate organs.

    The PM2.5 meter works by turning on a small fan at the beginning of a measurement cycle to bring in a volume of ambient air and measuring the particulate matter (PM) content of that sample volume. The sensor measures PM content using a laser that scatters based on the number and size of particles suspended in the air. It is important to keep the inlet ports of the sensor clear to ensure proper readings.

    This sensor comes standard with two replaceable AA batteries. The typical battery life is approximately 10 years.


    Features

    • Impressive wireless range of up to 1,200 feet through walls
    • Frequency-hopping spread spectrum (FHSS)
    • Improved interference immunity
    • Improved power management for longer battery life
    • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
    • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
      • 10-minute heartbeats = ~ 22 days
      • 2-hour heartbeats = ~ 266 days
    • Over-the-air updates
    • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


    Applications

    • Building/room air quality
    • Pollution sensing
    • Mines & Quarries
    • Cement factories
    • Construction/demolition sites
    • Petrochemical
    • Agricultural/waste
    • Waste treatment plants
    • Energy exploration and production


    IMPORTANT - Sensor Operation

    Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.


    Monnit Gateway Options

    An integral component of any IoT network is the gateway. A gateway device allows for data from sensors to be transmitted to the iMonnit software platform.


    Monnit Ethernet Wireless Gateway 4

    Monnit’s Ethernet Gateways allow your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply provide power and plug the gateway into an open Ethernet network port with an internet connection. It will then automatically connect with our online servers, providing the perfect solution for commercial locations where there is an active internet connection.

    Learn more about the Ethernet Wireless Gateway 4>>



    Monnit 4G + Ethernet IoT Gateway

    The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors. The ALTA IoT Gateway allows ALTA Sensors to operate on the world’s leading cellular networks and stay connected to the Internet. The gateway uses AC main power but also has redundant power through a battery backup lasting up to 60 hours.

    To meet the global demand for enterprise IoT deployment, the IoT Gateway communicates with the cloud-based iMonnit® monitoring software via cellular transmission, making it ideal for remote locations or where the Internet isn’t available. The RJ-45 Ethernet jack allows local device configuration, diagnostics, and connectivity backup. The IoT Gateway is instrumental in sending sensor notifications via text, email, or call if user-defined conditions are met or exceeded.

    Learn more about the 4G + Ethernet Wireless Gateway 4>>


    Online Sensor Monitoring Software

    iMonnit is a cloud based mobile internet platform and central hub for managing Monnit and ALTA products. All data is secured on dedicated servers operating Microsoft SQL Server. This online user interface is where all your device settings can be arranged, supervised, and modified to reflect your unique environment. OneTemp will look after the activation and setup of your new online iMonnit account free of charge. There is also a free mobile app for you to stay in control at all times. Start with the basic version or upgrade to iMonnit Premiere to enjoy the full features your Monnit experience can offer.


    iMonnit Basic Vs Premiere:

    • Basic - Free with no ongoing costs
      Monnit Basic is included for free with all wireless sensors, providing basic features for you to configure and monitor your sensors online. These basic features only support one network and one registered user on an account.
    • Premiere - Minimal Annual Fee
      iMonnit Premiere allows for enhanced functionality of your wireless sensors and includes an advanced software feature set at a low annual cost. All of iMonnit's advanced features are availble for configuration. You can have more sensors on your account, support multiple users, and view floorplans for all your sensors.

    Learn more about the iMonnit Premier Online Software>>

     


    Technical Information
    Supply voltage 2.0-3.8 VDC (5.0-12 VDC using power supply) 1
    Current consumption 0.2 μA (sleep mode), 0.7 μA (RTC sleep), 570 μA (MCU idle), 2.5
    mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX
    mode), 120.0 mA (Sense or Fan current)
    Operating temperature range (commercial version) 2 -18°C to 55°C (0°F to 130°F) with Alkaline Batteries
    -40°C to 85°C (-40°F to 185°F) with Lithium Battery
    Measurement sensitivity PM1: 0.3 to 1.0 um
    PM2.5: 1.0 to 2.5 um
    PM10: 2.5 to 10 um
    Counting efficiency 50% @ 0.3 um, 98% @ >= 0.5 um
    Effective range 0 to 500 ug/m^3
    Maximum range 0 to 1000 ug/m^3
    Maximu consistencen error +/- 10% @ 100 to 500 ug/m^3
    +/- 10 ug/m^3 @ 0 to 100 ug/m^3
    Response Time ~10 Seconds 3
    Active current ~180 mA @ 3.3 battery voltage, ~0.6 W overall
    Operating temperature -10 to 60 C
    Operating humidity 0 to 99%
    Storage temperature -40 to 80 C
    Mean time to failure >= 3 Years
    Integrated memory Up to 3200 sensor messages
    Wireless range 1,200+ ft non-line-of-sight
    Wireless operation 900 MHz-Frequency-Hopping Spread Spectrum
    868 MHz and 433 MHz-Frequency-Agile Wireless
    Security Encrypt-RF® (256-bit key exchange and AES-128 CTR)
    Weight 3.7 ounces
    Certifications 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1.
    868 and 433 MHz product tested and found to comply with: EN 300
    220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN
    60950

    1 Hardware cannot withstand negative voltage. Please take care when connecting a power device.
    2 At temperatures above 100°C, it is possible for the board circuitry to lose programmed memory.
    3 Response time may vary with stability threshold setting and PM concentration. Increasing the stability threshold will improve response time but reduce stability and accuracy of readings. With higher PM concentrations the sensor will acquire stable readings more quickly

    Particulates matter, monitor them

    Monnit’s Wireless - PM2.5 um Meter measures PM1, PM2.5 and PM10 concentrations in the air and transmits the measurement to iMonnit. Elevated levels of PM10 (2.5-10 um) particle pollution irritate the respiratory tract and eyes; smaller PM2.5 (1.0-2.5 um) particles can penetrate deep into the lungs. As the most dangerous of all, PM1 (0.3-1.0 um) can slip through the lungs and penetrate organs.

    The PM2.5 meter works by turning on a small fan at the beginning of a measurement cycle to bring in a volume of ambient air and measuring the particulate matter (PM) content of that sample volume. The sensor measures PM content using a laser that scatters based on the number and size of particles suspended in the air. It is important to keep the inlet ports of the sensor clear to ensure proper readings.

    This sensor comes standard with two replaceable AA batteries. The typical battery life is approximately 10 years.


    Features

    • Impressive wireless range of up to 1,200 feet through walls
    • Frequency-hopping spread spectrum (FHSS)
    • Improved interference immunity
    • Improved power management for longer battery life
    • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
    • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
      • 10-minute heartbeats = ~ 22 days
      • 2-hour heartbeats = ~ 266 days
    • Over-the-air updates
    • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


    Applications

    • Building/room air quality
    • Pollution sensing
    • Mines & Quarries
    • Cement factories
    • Construction/demolition sites
    • Petrochemical
    • Agricultural/waste
    • Waste treatment plants
    • Energy exploration and production


    IMPORTANT - Sensor Operation

    Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.


    Related products
    Picture of iMonnit Cloud Sensor Management Software

    iMonnit Cloud Sensor Management Software

    iMonnit Basic & Premiere Wireless Web Based Sensor Monitoring and Notification Systems.
    $0.00 (ex gst)
    Picture of Monnit IoT Gateway (4G)

    Monnit IoT Gateway (4G)

    The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform (commercial only) with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors.
    $958.00 (ex gst)
    Picture of Monnit Ethernet Gateway

    Monnit Ethernet Gateway

    The MonnitLink Ethernet gateway allows your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC
    $613.00 (ex gst)

    Quality Guaranteed

    Information
    My account
    Customer service

    Safe & Secure Payments

    Quality Guaranteed

    Copyright © 2024 OneTemp New Zealand. All rights reserved.