Monnit Industrial Voltage Detection Wireless Sensor
 

Simplify Data Monitoring with Bluetooth Data Loggers - Explore the Range >>

Simplify Data Monitoring with Bluetooth Data Loggers - Explore the Range >>

Menu
Search
Search Our Catalogue Close
Shopping cart Close
Menu Close
All Categories

    Monnit Industrial Voltage Detection Wireless Sensor

    Machine operators and facility managers have a second set of eyes in Monnit’s Voltage Detection Wireless Sensors. This wireless voltage sensor tracks power sources or monitors the on/off status of equipment and machines, as well as battery levels.
    Part Number: MNS2-4-IN-VD-xx
    Manufacturer:
    0Types Available
    Back to Previous Page
    Product Files

    Keep an eye on equipment power

    The 0–200 VDC and 0–500 VAC devices are triggered by electricity’s presence or absence in batteries or other sources, such as solar equipment. If a monitored value rises or falls beyond user-set thresholds, an alert is sent via text, email, or call. Know when essential appliances are operative (helpful for remote locations or decentralized operations).

    This sensor comes with an industrial battery included with the life of up to 7 years.

    All industrial sensors are enclosed in a reliable, weatherproof NEMA-rated enclosure that are constructed for both indoor and outdoor use. These rugged enclosures protect the sensor circuitry against;

    • Falling dirt
    • Wind-blown dust
    • Rain, sleet, snow, splashing water, and hose-directed water
    • Ice formation on the enclosure
    • Increased resistance to corrosion


    Features

    • Impressive wireless range of up to 1,200 feet through walls
    • Frequency-hopping spread spectrum (FHSS)
    • Improved interference immunity
    • Improved power management for longer battery life
    • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
    • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
      • 10-minute heartbeats = ~ 22 days
      • 2-hour heartbeats = ~ 266 days
    • Over-the-air updates
    • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


    Applications

    • Appliance Monitoring
    • Line Power Monitoring
    • Power Coupling Monitoring
    • HVAC Systems Monitoring
    • Power Supply Monitoring
    • Sump Pump Monitoring
    • Backup Generator Monitoring
    • Machine Motor Monitoring


    IMPORTANT - Sensor Operation

    Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.


    Monnit Gateway Options

    An integral component of any IoT network is the gateway. A gateway device allows for data from sensors to be transmitted to the iMonnit software platform.


    Monnit Ethernet Wireless Gateway 4

    Monnit’s Ethernet Gateways allow your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply provide power and plug the gateway into an open Ethernet network port with an internet connection. It will then automatically connect with our online servers, providing the perfect solution for commercial locations where there is an active internet connection.

    Learn more about the Ethernet Wireless Gateway 4>>



    Monnit 4G + Ethernet IoT Gateway

    The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors. The ALTA IoT Gateway allows ALTA Sensors to operate on the world’s leading cellular networks and stay connected to the Internet. The gateway uses AC main power but also has redundant power through a battery backup lasting up to 60 hours.

    To meet the global demand for enterprise IoT deployment, the IoT Gateway communicates with the cloud-based iMonnit® monitoring software via cellular transmission, making it ideal for remote locations or where the Internet isn’t available. The RJ-45 Ethernet jack allows local device configuration, diagnostics, and connectivity backup. The IoT Gateway is instrumental in sending sensor notifications via text, email, or call if user-defined conditions are met or exceeded.

    Learn more about the 4G + Ethernet Wireless Gateway 4>>


    Online Sensor Monitoring Software

    iMonnit is a cloud based mobile internet platform and central hub for managing Monnit and ALTA products. All data is secured on dedicated servers operating Microsoft SQL Server. This online user interface is where all your device settings can be arranged, supervised, and modified to reflect your unique environment. OneTemp will look after the activation and setup of your new online iMonnit account free of charge. There is also a free mobile app for you to stay in control at all times. Start with the basic version or upgrade to iMonnit Premiere to enjoy the full features your Monnit experience can offer.


    iMonnit Basic Vs Premiere:

    • Basic - Free with no ongoing costs
      Monnit Basic is included for free with all wireless sensors, providing basic features for you to configure and monitor your sensors online. These basic features only support one network and one registered user on an account.
    • Premiere - Minimal Annual Fee
      iMonnit Premiere allows for enhanced functionality of your wireless sensors and includes an advanced software feature set at a low annual cost. All of iMonnit's advanced features are availble for configuration. You can have more sensors on your account, support multiple users, and view floorplans for all your sensors.

    Learn more about the iMonnit Premier Online Software>>

     


    Technical Information - 0-200 VDC Voltage Sensor
    Supply voltage 2.0-3.8 VDC (3.0-3.8 VDC using power supply) *
    Current consumption 0.2 μA (sleep mode), 0.7 μA (RTC sleep), 570 μA (MCU idle), 2.5
    mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX
    mode)
    Operating temperature range (board circuitry and battery) -40°C to +85°C (-40°F to +185°F) **
    Included battery Max temperature range -40° to +85°C (-40° to +185°F)
    Capacity 1500 mAh
    Accurate range 0200 VDC ***
    Absolute maximum voltage 250 VDC ***
    Absolute minimum voltage -250 VDC
    Sensor resolution 0.01 VDC
    Accuracy +/- (.15 V + 1% of Reading)
    Input impedance 665 MOhm
    Integrated memory Up to 3200 sensor messages
    Wireless range 1,200+ ft non-line-of-sight
    Security Encrypt-RF® (256-bit key exchange and AES-128 CTR)
    Weight 4.7 ounces
    Enclosure rating NEMA 1, 2, 4, 4x, 12 and 13 rated, sealed and weather proof
    UL rating UL Listed to UL508-4x specifications (File E194432)
    Certifications 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1.
    868 and 433 MHz product tested and found to comply with: EN
    300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and
    EN 60950


    * Circuit cannot withstand negative voltage. Please take care when installing batteries.
    ** At temperatures above 100°C, it is possible for the board circuitry to lose programmed memory.
    *** Light present 25% of day yields 125% of operating power to support 10-minute heartbeats.
    **** The sensor is capable of measuring above 200 volts but may not meet the specified accuracy above this value.

    Technical Information - 0-500 VAC Voltage Sensor
    Supply voltage 2.0-3.8 VDC (3.0-3.8 VDC using power supply) *
    Current consumption 0.2 μA (sleep mode), 0.7 μA (RTC sleep), 570 μA (MCU idle), 2.5
    mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX
    mode)
    Operating temperature range (board circuitry and battery) -40°C to +85°C (-40°F to +185°F)
    Included battery Max temperature range -40° to +85°C (-40° to +185°F)
    Capacity 1500 mAh
    Absolute Maximum Input Voltage 600 VAC rms **
    Response Time ~1 Second
    Minimum Detection Voltage > 4 VAC rms
    Indeterminate Detection Region 3 - 4 VAC rms
    Input Impedance 2 MOhm
    Leaded wire specification 2 Wires, 1 ft (12 in), Black (Line), White (Common), 18 AWG
    Datalogging Datalogs 2000 to 4000 readings if gateway connection is lost
    (non-volatile flash, persists through the power cycle):
    - 10-minute heartbeats = ~ 22 days
    - 2-hour heartbeats = ~ 266 days
    Wireless range 1,200+ ft non-line-of-sight
    Security Encrypt-RF® (256-bit key exchange and AES-128 CTR)
    Weight 4.7 ounces
    Enclosure rating NEMA 1, 2, 4, 4x, 12 and 13 rated, sealed and weather proof
    UL rating UL Listed to UL508-4x specifications (File E194432)
    Certification 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1.
    868 and 433 MHz product tested and found to comply with: EN
    300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and
    EN 60950

    *Circuit cannot withstand negative voltage. Please take care when installing batteries.
    **Light present 25% of day yields 125% of operating power to support 10-minute heartbeats

    Keep an eye on equipment power

    The 0–200 VDC and 0–500 VAC devices are triggered by electricity’s presence or absence in batteries or other sources, such as solar equipment. If a monitored value rises or falls beyond user-set thresholds, an alert is sent via text, email, or call. Know when essential appliances are operative (helpful for remote locations or decentralized operations).

    This sensor comes with an industrial battery included with the life of up to 7 years.

    All industrial sensors are enclosed in a reliable, weatherproof NEMA-rated enclosure that are constructed for both indoor and outdoor use. These rugged enclosures protect the sensor circuitry against;

    • Falling dirt
    • Wind-blown dust
    • Rain, sleet, snow, splashing water, and hose-directed water
    • Ice formation on the enclosure
    • Increased resistance to corrosion


    Features

    • Impressive wireless range of up to 1,200 feet through walls
    • Frequency-hopping spread spectrum (FHSS)
    • Improved interference immunity
    • Improved power management for longer battery life
    • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
    • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
      • 10-minute heartbeats = ~ 22 days
      • 2-hour heartbeats = ~ 266 days
    • Over-the-air updates
    • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


    Applications

    • Appliance Monitoring
    • Line Power Monitoring
    • Power Coupling Monitoring
    • HVAC Systems Monitoring
    • Power Supply Monitoring
    • Sump Pump Monitoring
    • Backup Generator Monitoring
    • Machine Motor Monitoring


    IMPORTANT - Sensor Operation

    Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.


    Picture of Monnit Industrial Voltage Detection Wireless Sensor (200VDC)
    Monnit Industrial Voltage Detection Wireless Sensor (200VDC)
    Machine operators and facility managers have a second set of eyes in Monnit’s 200 VDC wireless sensor. Based on user settings, the presence or absence of voltage triggers the sensor to send an alert.
    Part Number: MNS2-4-IN-VD-200
    $569.00 ex GST
    i h
    Picture of Monnit Industrial Voltage Detection Wireless Sensor (500 VAC)
    Monnit Industrial Voltage Detection Wireless Sensor (500 VAC)
    Monnit’s Voltage Detection Wireless sensor interfaces with a device or system to detect voltages to 500 VAC. If the sensor does (or doesn’t) detect voltage during measurement, you’ll be alerted.
    Part Number: MNS2-4-IN-VD-AC
    $569.00 ex GST
    i h
    Related products
    Picture of iMonnit Cloud Sensor Management Software

    iMonnit Cloud Sensor Management Software

    iMonnit Basic & Premiere Wireless Web Based Sensor Monitoring and Notification Systems.
    $0.00 (ex gst)
    Picture of Monnit Enterprise Voltage Detection Wireless Sensor

    Monnit Enterprise Voltage Detection Wireless Sensor

    The 0–200 VDC and 0–500 VAC devices are triggered by electricity’s presence or absence in batteries or other sources, such as solar equipment.
    from $458.00 (ex gst)
    Picture of Monnit IoT Gateway (4G)

    Monnit IoT Gateway (4G)

    The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform (commercial only) with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors.
    $958.00 (ex gst)
    Picture of Monnit Ethernet Gateway

    Monnit Ethernet Gateway

    The MonnitLink Ethernet gateway allows your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC
    $613.00 (ex gst)

    Quality Guaranteed

    Information
    My account
    Customer service

    Safe & Secure Payments

    Quality Guaranteed

    Copyright © 2024 OneTemp New Zealand. All rights reserved.