Simplify Data Monitoring with Bluetooth Data Loggers - Explore the Range >>

Simplify Data Monitoring with Bluetooth Data Loggers - Explore the Range >>

Menu
Search
Search Our Catalogue Close
Shopping cart Close
Menu Close
All Categories

    Monnit ALTA Serial MODBUS Gateway

    Manufacturer:
    The ALTA Serial MODBUS Gateway is used for connecting a wireless sensor network to a PLC SCADA System.
    Part Number: MNG2-4-SG-SMG
    Back to Previous Page
    Product Files
    $759.00 ex GST
    i h

    Make your data communication seamless 

    The Monnit Serial MODBUS Gateway acts as a data concentrator for Monnit wireless sensor networks. This device incorporates Monnit's Access Point Node (APN) and Serial RS-232C and RS-485 Interfacing hardware.

    Notes: We recommend purchasing the Serial MODBUS Gateway - USB programmer and software to help you configure and use your Monnit SMG Gateway. See Below


    Features

    • Works with Monnit Sensor Networking Solutions
    • Communicates with MODBUS RTU / ASCII Serial Protocolsf
    • Supports RS-232C / RS-485 Interfacing
    • NEMA 4X / IP66 Rated Enclosure
    • RP SMA Antenna Connector (Antenna Included)


    Suggested Application Uses for This Sensor

    • Transmits sensor data to the iMonnit online sensor monitoring portal
    • Commercial monitoring applications
    • Facilities monitoring
    • Small business monitoring
    • Large business monitoring


     

    Serial USB MODBUS Programmer

    Serial MODBUS Gateway Configuration Utility with RS485 to USB Converter allows you to connect the serial gateway to a computer to configure gateway settings, add wireless sensors and test functionality. This product includes an RS485 to USB converting USB dongle and Monnit's Serial MODBUS configuration software.

    Download Software here: https://www.monnit.com/support/downloads


    IMPORTANT

    The Gateway is an integral component as it relays data collected by sensors to the software. For further information, please refer to the tabs above


    Online Sensor Monitoring Software

    iMonnit is a cloud based mobile internet platform and central hub for managing Monnit and ALTA products. All data is secured on dedicated servers operating Microsoft SQL Server. This online user interface is where all your device settings can be arranged, supervised, and modified to reflect your unique environment. OneTemp will look after the activation and setup of your new online iMonnit account free of charge. There is also a free mobile app for you to stay in control at all times. Start with the basic version or upgrade to iMonnit Premiere to enjoy the full features your Monnit experience can offer.


    iMonnit Basic Vs Premiere:

    • Basic - Free with no ongoing costs
      Monnit Basic is included for free with all wireless sensors, providing basic features for you to configure and monitor your sensors online. These basic features only support one network and one registered user on an account.
    • Premiere - Minimal Annual Fee
      iMonnit Premiere allows for enhanced functionality of your wireless sensors and includes an advanced software feature set at a low annual cost. All of iMonnit's advanced features are availble for configuration. You can have more sensors on your account, support multiple users, and view floorplans for all your sensors.

    Learn more about the iMonnit Premier Online Software>>

     


    Specifications

    Wireless
    Wireless Range 1,200+ ft. non-line-of-sight *
    Security Encrypt-RF® (256-bit key exchange and AES-128 CTR)
    Monnit Radio Support ALTA Wireless Module by Monnit
    Frequencies: 900, 868 and 433 MHz
    Antenna Connector: RP-SMA
    Gain: 5.0 dBi Standard
    Certifications 900 MHz product; FCC ID: ZTL- G2SC1 and IC: 9794A-G2SC1. 868 and
    433 MHz product tested and found to comply with: EN 300 220-2 V3.1.1
    (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.

    3 Wire Communication Interface
    RS-232C TXD (OUT), RXD (IN), and Ground / Common
    RS-485 D+, D-, and Ground / Common
    Protocol Selector Jumper for RS-232 and RS485

    Power
    Input Voltage Range 4.5 - 36.0 VDC **
    Minimum Current Required 100mA (500mA Recommended)

    Environmental
    Operating Temperature -40°C to +85°C (-40°F to 185°F) ***
    Storage Temperature -40°C to +85°C (-40°F to 185°F)

    Mechanical
    LEDs Wireless Activity, Wired Activity, System Status
    Reset Feature Communication / Factory Settings Reset Jumper
    Enclosure Durable, Impact-Resistant UV Stabilized Polycarbonate
    (IP65 of IEC 529 and NEMA 1, 2, 4, 4x, 12 and 13 Rated)
    Dimensions 179.603 x 90.678 x 41.30 mm
    Weight 16 ounces

    * Actual range may vary depending on environment.
    ** Hardware cannot withstand negative voltage. Please take care when connecting a power device.

    Make your data communication seamless 

    The Monnit Serial MODBUS Gateway acts as a data concentrator for Monnit wireless sensor networks. This device incorporates Monnit's Access Point Node (APN) and Serial RS-232C and RS-485 Interfacing hardware.

    Notes: We recommend purchasing the Serial MODBUS Gateway - USB programmer and software to help you configure and use your Monnit SMG Gateway. See Below


    Features

    • Works with Monnit Sensor Networking Solutions
    • Communicates with MODBUS RTU / ASCII Serial Protocolsf
    • Supports RS-232C / RS-485 Interfacing
    • NEMA 4X / IP66 Rated Enclosure
    • RP SMA Antenna Connector (Antenna Included)


    Suggested Application Uses for This Sensor

    • Transmits sensor data to the iMonnit online sensor monitoring portal
    • Commercial monitoring applications
    • Facilities monitoring
    • Small business monitoring
    • Large business monitoring


     

    Serial USB MODBUS Programmer

    Serial MODBUS Gateway Configuration Utility with RS485 to USB Converter allows you to connect the serial gateway to a computer to configure gateway settings, add wireless sensors and test functionality. This product includes an RS485 to USB converting USB dongle and Monnit's Serial MODBUS configuration software.

    Download Software here: https://www.monnit.com/support/downloads


    IMPORTANT

    The Gateway is an integral component as it relays data collected by sensors to the software. For further information, please refer to the tabs above


    Related products
    Picture of Monnit Enterprise Duct Temperature Wireless Sensor

    Monnit Enterprise Duct Temperature Wireless Sensor

    These devices accurately measure ductwork temps while maintaining a sealed environment. If temps spike or fall beyond your preset limits, the sensors alert you (or on-site maintenance techs) via email, text, or call.
    $369.00 (ex gst)
    Picture of Monnit Enterprise High Temperature Wireless Sensor

    Monnit Enterprise High Temperature Wireless Sensor

    Monnit’s High-temp Sensors remotely monitor commercial ovens, heaters, furnaces, boilers, and other can’t-fail applications with a -50°C to +370°C (-58°F to +700°F) temperature range. A temp swing will trigger a sensor alert for you in real-time via email, text, or call.
    $345.00 (ex gst)
    Picture of Monnit Enterprise Carbon Dioxide (CO2) Wireless Sensor

    Monnit Enterprise Carbon Dioxide (CO2) Wireless Sensor

    This sensor monitors Carbon Dioxide (CO2) gas; if levels exceed preset limits, designated personnel are alerted via text, email, or call
    $915.00 (ex gst)
    Picture of Monnit Enterprise Dry Contact Wireless Sensor

    Monnit Enterprise Dry Contact Wireless Sensor

    Detect if contact is made or broken between two wired points.
    $285.00 (ex gst)

    Quality Guaranteed

    Information
    My account
    Customer service

    Safe & Secure Payments

    Quality Guaranteed

    Copyright © 2024 OneTemp New Zealand. All rights reserved.