Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Search
Menu Close

Monnit Enterprise Hydrogen Sulfide (H2S) Gas Wireless Sensor

Manufacturer:
Measure the levels of toxic H2S gas in the environment and get alerts when thresholds are breached
Part Number: MNS2-4-W2-GS-H2S
Back to Previous Page
$680.00 ex GST
i h
Delivery date: 2-3 weeks

A smart way to monitor H2S in the workplace

Hydrogen Sulfide (H2S) is a toxic gas that stalks underground telecom vaults and many other enclosed industrial, agricultural, and commercial areas. Highly flammable, H2S also gravitates to ignition sources, posing a risk of flashbacks or explosions.

The Monnit Enterprise Hydrogen Sulfide Gas Wireless Sensor measures the levels of toxic H2S gas in the environment. The sensor produces instantaneous and 8-hour time weighted average (TWA) H2S readings along with temperature. Every five seconds the sensor takes a new temperature-compensated H2S measurement and checks this measurement against a configurable threshold. If the threshold is crossed, the sensor transmits data immediately. This means the sensor can report a critical gas level as soon as it's detected. If the threshold isn't crossed, the sensor transmits H2S data at a configurable Heartbeat. Using configurable Actions within iMonnit Software, you can set up notifications to be sent via text, email, and phone call as different triggering events occur - gas level, battery level, inactivity, etc. The instantaneous reading is calculated using 40 seconds of data averaged together for improved stability and accuracy. The TWA reading is calculated using eight hours of data.

This sensor come standard with two replaceable AA batteries. The typical battery life is approximately 10 years.


Features

  • Measures H2S levels in surrounding air
  • Provides instantaneous and TWA H2S readings
    • Works within excellent range (0 to 50 ppm)
    • Offers configurable thresholds
    • Responds in less than one minute
  • Impressive wireless range of up to 1,200 feet through walls
  • Frequency-hopping spread spectrum (FHSS)
  • Improved interference immunity
  • Improved power management for longer battery life
  • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
  • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
    • 10-minute heartbeats = ~ 22 days
    • 2-hour heartbeats = ~ 266 days
  • Over-the-air updates
  • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


Applications

  • Natural Gas Production
  • Crude Oil Production
  • Wastewater treatment
  • Utility Facilities
  • Sewers


IMPORTANT - Sensor Operation

Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.

Monnit Gateway Options

An integral component of any IoT network is the gateway. A gateway device allows for data from sensors to be transmitted to the iMonnit software platform.


Monnit Ethernet Wireless Gateway 4

Monnit’s Ethernet Gateways allow your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply provide power and plug the gateway into an open Ethernet network port with an internet connection. It will then automatically connect with our online servers, providing the perfect solution for commercial locations where there is an active internet connection.

Learn more about the Ethernet Wireless Gateway 4>>



Monnit 4G + Ethernet IoT Gateway

The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors. The ALTA IoT Gateway allows ALTA Sensors to operate on the world’s leading cellular networks and stay connected to the Internet. The gateway uses AC main power but also has redundant power through a battery backup lasting up to 60 hours.

To meet the global demand for enterprise IoT deployment, the IoT Gateway communicates with the cloud-based iMonnit® monitoring software via cellular transmission, making it ideal for remote locations or where the Internet isn’t available. The RJ-45 Ethernet jack allows local device configuration, diagnostics, and connectivity backup. The IoT Gateway is instrumental in sending sensor notifications via text, email, or call if user-defined conditions are met or exceeded.

Learn more about the 4G + Ethernet Wireless Gateway 4>>


Online Sensor Monitoring Software

iMonnit is a cloud based mobile internet platform and central hub for managing Monnit and ALTA products. All data is secured on dedicated servers operating Microsoft SQL Server. This online user interface is where all your device settings can be arranged, supervised, and modified to reflect your unique environment. OneTemp will look after the activation and setup of your new online iMonnit account free of charge. There is also a free mobile app for you to stay in control at all times. Start with the basic version or upgrade to iMonnit Premiere to enjoy the full features your Monnit experience can offer.


iMonnit Basic Vs Premiere:

  • Basic - Free with no ongoing costs
    Monnit Basic is included for free with all wireless sensors, providing basic features for you to configure and monitor your sensors online. These basic features only support one network and one registered user on an account.
  • Premiere - Minimal Annual Fee
    iMonnit Premiere allows for enhanced functionality of your wireless sensors and includes an advanced software feature set at a low annual cost. All of iMonnit's advanced features are availble for configuration. You can have more sensors on your account, support multiple users, and view floorplans for all your sensors.

Learn more about the iMonnit Premier Online Software>>

 


Technical Information

Supply Voltage 2.0 - 3.8 VDC (2 x AA 1.5V Batteries or Optional Power
Supply) *
Current Consumption 0.7 µA (sleep mode)
2 mA (radio idle/off mode)
2 mA (measurement mode)
25 mA (radio RX mode)
35 mA (radio TX mode)
Operating Temperature Range (Board Circuitry and Batteries) -18°C to 55°C (0°F to 130°F) using alkaline
-40°C to 60°C (-40°F to 140°F) using lithium **
Optimal Battery Temperature Range (AA) +10°C to +50°C ( 50°F to +122°F )
Operating Pressure Range ± 0.2 atm (recommended)
Operating Humidity Range 15 to 85% RH
Measuring Range 0-50 PPM
Maximum Overload 50 PPM
Measuring Principle Electrochemical reaction of H2S
Resolution ± 0.1 PPM
Response Time (t-90) < 40 seconds typical at 20°C
Stabilization Time < 120 seconds
Long Term Drift – Zero Zero Signal ≤ ± 2 PPM / month
Long Term Drift – Span Output Signal ≤ ± 2% of reading per month
Maximum Zero Shift < 1 ppm equivalent (-20°C to +40°C)
Weight 4.0 oz.
Wireless Range 1,200+ ft. non-line-of-sight
Certifications 900 MHz product; FCC ID: ZTL- RFSC1 and IC: 9794ARFSC1. 920 MHz product; ARIB STD-T108 R210-
103733. 868 and 433 MHz product tested and found
to comply with: CISPR 22:2008-09 / EN 55022:2010 -
Class B and ETSI EN 300 220-2 V2.4.1 (2012-05).


* Circuits cannot withstand negative voltage. Please take care when installing batteries.

A smart way to monitor H2S in the workplace

Hydrogen Sulfide (H2S) is a toxic gas that stalks underground telecom vaults and many other enclosed industrial, agricultural, and commercial areas. Highly flammable, H2S also gravitates to ignition sources, posing a risk of flashbacks or explosions.

The Monnit Enterprise Hydrogen Sulfide Gas Wireless Sensor measures the levels of toxic H2S gas in the environment. The sensor produces instantaneous and 8-hour time weighted average (TWA) H2S readings along with temperature. Every five seconds the sensor takes a new temperature-compensated H2S measurement and checks this measurement against a configurable threshold. If the threshold is crossed, the sensor transmits data immediately. This means the sensor can report a critical gas level as soon as it's detected. If the threshold isn't crossed, the sensor transmits H2S data at a configurable Heartbeat. Using configurable Actions within iMonnit Software, you can set up notifications to be sent via text, email, and phone call as different triggering events occur - gas level, battery level, inactivity, etc. The instantaneous reading is calculated using 40 seconds of data averaged together for improved stability and accuracy. The TWA reading is calculated using eight hours of data.

This sensor come standard with two replaceable AA batteries. The typical battery life is approximately 10 years.


Features

  • Measures H2S levels in surrounding air
  • Provides instantaneous and TWA H2S readings
    • Works within excellent range (0 to 50 ppm)
    • Offers configurable thresholds
    • Responds in less than one minute
  • Impressive wireless range of up to 1,200 feet through walls
  • Frequency-hopping spread spectrum (FHSS)
  • Improved interference immunity
  • Improved power management for longer battery life
  • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
  • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
    • 10-minute heartbeats = ~ 22 days
    • 2-hour heartbeats = ~ 266 days
  • Over-the-air updates
  • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


Applications

  • Natural Gas Production
  • Crude Oil Production
  • Wastewater treatment
  • Utility Facilities
  • Sewers


IMPORTANT - Sensor Operation

Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.