Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Search
Menu Close

Monnit Digital Temperature Wireless Sensor

Manufacturer:
The Monnit Digital Temperature Sensor measures the ambient temperature based on a user-configurable time interval or Heartbeat. The temperature is also shown on the digital display when you press the Read button.
Part Number: MNS2-4-W2-TS-SD-L03
Back to Previous Page
$590.00 ex GST
i h
Delivery date: 4-6 weeks

Make data-driven decisions with Monnit's Digital Sensor 

Monnit's Wireless Digital Temperature Sensor produces and displays a thermistor-based temperature measurement and is available with multiple lead lengths.

This Sensor measures the ambient temperature based on a user-configurable time interval or Heartbeat. The temperature is also shown on the digital display when you press the Read button. When performing a measurement, the sensor momentarily energises a thermistor in series with a precision resistor. This produces a voltage directly proportional to the temperature of the thermistor. The sensor converts the analog voltage signal to a digital value and computes the temperature measurement. On every Heartbeat or when the Read button is pressed, the sensor reports its current measurement to the gateway, making the data available in iMonnit or other approved data services. Monnit's Enterprise Digital Temperature Sensor can also be calibrated for improved accuracy.

The Digital Temperature Sensor provides alerts via text, email, or call should temps deviate from user-set thresholds. Configure notifications, alerts, data logging, and reports via iMonnit Software.

Researchers, retailers, and restaurateurs alike benefit from on-demand temperature readouts. Join the ranks with this sensor.


Key Features

  • Measurement range: -40°C to 125°C (-40°F - 257VF)
    • Resolution: 0.1°C (0.18°F)
    • Accuracy: ±1°C (±1.8°F)
  • 4-digit display with Power and Read buttons
  • Configurable thresholds for critical condition monitoring


Features

  • Impressive wireless range of up to 1,200 feet through walls
  • Frequency-hopping spread spectrum (FHSS)
  • Improved interference immunity
  • Improved power management for longer battery life
  • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
  • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
    • 10-minute heartbeats = ~ 22 days
    • 2-hour heartbeats = ~ 266 days
  • Over-the-air updates
  • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


Applications

  • Ambient temperature monitoring
  • Cooler and freezer monitoring
  • Environmental monitoring
  • Laboratory monitoring
  • Data centre montioring
  • Meeting data redundancy regulations


IMPORTANT - Sensor Operation

Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.


Monnit Gateway Options

An integral component of any IoT network is the gateway. A gateway device allows for data from sensors to be transmitted to the iMonnit software platform.


Monnit Ethernet Wireless Gateway 4

Monnit’s Ethernet Gateways allow your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply provide power and plug the gateway into an open Ethernet network port with an internet connection. It will then automatically connect with our online servers, providing the perfect solution for commercial locations where there is an active internet connection.

Learn more about the Ethernet Wireless Gateway 4>>



Monnit 4G + Ethernet IoT Gateway

The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors. The ALTA IoT Gateway allows ALTA Sensors to operate on the world’s leading cellular networks and stay connected to the Internet. The gateway uses AC main power but also has redundant power through a battery backup lasting up to 60 hours.

To meet the global demand for enterprise IoT deployment, the IoT Gateway communicates with the cloud-based iMonnit® monitoring software via cellular transmission, making it ideal for remote locations or where the Internet isn’t available. The RJ-45 Ethernet jack allows local device configuration, diagnostics, and connectivity backup. The IoT Gateway is instrumental in sending sensor notifications via text, email, or call if user-defined conditions are met or exceeded.

Learn more about the 4G + Ethernet Wireless Gateway 4>>


Online Sensor Monitoring Software

iMonnit is a cloud based mobile internet platform and central hub for managing Monnit and ALTA products. All data is secured on dedicated servers operating Microsoft SQL Server. This online user interface is where all your device settings can be arranged, supervised, and modified to reflect your unique environment. OneTemp will look after the activation and setup of your new online iMonnit account free of charge. There is also a free mobile app for you to stay in control at all times. Start with the basic version or upgrade to iMonnit Premiere to enjoy the full features your Monnit experience can offer.


iMonnit Basic Vs Premiere:

  • Basic - Free with no ongoing costs
    Monnit Basic is included for free with all wireless sensors, providing basic features for you to configure and monitor your sensors online. These basic features only support one network and one registered user on an account.
  • Premiere - Minimal Annual Fee
    iMonnit Premiere allows for enhanced functionality of your wireless sensors and includes an advanced software feature set at a low annual cost. All of iMonnit's advanced features are availble for configuration. You can have more sensors on your account, support multiple users, and view floorplans for all your sensors.

Learn more about the iMonnit Premier Online Software>>

 


Technical Information

Temperature Measurement

Range - Leaded sensor -40°C to 125°C (-40°F to 257°F)
Accuracy @ 25°C (77°F) ± 1°C (±1.8°F)
Calibrated accuracy ± 0.25°C (± 0.45°F)
Resolution 0.1°C (0.18°F)
Response time 50 seconds (10 second time constant)1
Units C or F (User configurable)
Leaded Probe Transducer Type 10 KOhm NTC Thermistor (β = 3455 K)
Tip Dimension 4.00 mm (0.157") diameter by 30 mm (1.18")
Tip Material Type 304 stainless steel
Cable Material Waterproof high-temperature ABS with EMF shielding
Cable Diameter 3.56 mm (0.14")
Cable Length Options 3 ft or 10 ft (Contact Monnit for custom length options)
LED Display Operating Temperature Range -10°C to 60°C (14°F to 140°F)
Storage Temperature Range -20°C to 70°C (-4°F to 158°F)
LED Symbols 4 digits, 3 decimals, C/F, Low Battery, Signal Strength, Minus
Display Size 14.0 mm x 26.0 mm
Digit Size 8.5 mm x 4.5 mm
ALTA Wireless Data Logging Sensor logs 2000 to 4000 readings if gateway connection is lost
(non-volatile flash, persists through power cycling): 10-minute
Wireless protocol ALTA Proprietary Frequency-Hopping Spread Spectrum (FHSS)
Wireless Transmission Power (EIRP) 50 mW (900MHz), 25 mW (868 MHz), 10 mW (433 MHz)
Wireless Range 2,000+ ft. through 18+ walls with the ALTA XL® Gateway
Security Encrypt-RF® (256-bit key exchange and AES-128 CTR)
General Battery Voltage Range 2.0 to 3.8 VDC
Expected Battery Life (Default Settings) 14+ years
Operating Altitude (Non-Pressurised Environments) -15.2 to 1,982 m (-50 to 6,500 ft)2
Storage Altitude (Non-Pressurised Environments)  -15.2 to 3,048 m (-50 to 10,000 ft)2
Operating Humidity 5 to 85% RH (non-condensing)
Certifications 900 MHz sensors: FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1.
868 and 433 MHz sensors tested and comply with: EN 55032:
2015/A11:2020; EN 55035:2017/A11:2020; ETSI EN 300 220
V3.2.1 (2018-06); ETSI EN 301 489-3 V2.2.0. (2021-11); and
ETSI EN 303 645. All sensors tested and comply with: EN
61010-1 and EN 60950 and meet RoHS 2015/863 and REACH

1 Response time defined as five time constants for 99.3% of actual temperature.
2 Operating and storage altitude without DC power supply is -30.48 to 9144 m (-100 to 30000 ft).

Make data-driven decisions with Monnit's Digital Sensor 

Monnit's Wireless Digital Temperature Sensor produces and displays a thermistor-based temperature measurement and is available with multiple lead lengths.

This Sensor measures the ambient temperature based on a user-configurable time interval or Heartbeat. The temperature is also shown on the digital display when you press the Read button. When performing a measurement, the sensor momentarily energises a thermistor in series with a precision resistor. This produces a voltage directly proportional to the temperature of the thermistor. The sensor converts the analog voltage signal to a digital value and computes the temperature measurement. On every Heartbeat or when the Read button is pressed, the sensor reports its current measurement to the gateway, making the data available in iMonnit or other approved data services. Monnit's Enterprise Digital Temperature Sensor can also be calibrated for improved accuracy.

The Digital Temperature Sensor provides alerts via text, email, or call should temps deviate from user-set thresholds. Configure notifications, alerts, data logging, and reports via iMonnit Software.

Researchers, retailers, and restaurateurs alike benefit from on-demand temperature readouts. Join the ranks with this sensor.


Key Features

  • Measurement range: -40°C to 125°C (-40°F - 257VF)
    • Resolution: 0.1°C (0.18°F)
    • Accuracy: ±1°C (±1.8°F)
  • 4-digit display with Power and Read buttons
  • Configurable thresholds for critical condition monitoring


Features

  • Impressive wireless range of up to 1,200 feet through walls
  • Frequency-hopping spread spectrum (FHSS)
  • Improved interference immunity
  • Improved power management for longer battery life
  • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
  • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
    • 10-minute heartbeats = ~ 22 days
    • 2-hour heartbeats = ~ 266 days
  • Over-the-air updates
  • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


Applications

  • Ambient temperature monitoring
  • Cooler and freezer monitoring
  • Environmental monitoring
  • Laboratory monitoring
  • Data centre montioring
  • Meeting data redundancy regulations


IMPORTANT - Sensor Operation

Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.