Personal menu

Calex PyroCube XS - Extremely small targets

Manufacturer:

The PyroCube XS is a range of infrared temperature sensors with tightly focused optics that can measure very small areas.

Part Number: PyroCube XS

Back to Previous Page

Product Files

Call for pricing

Overview
Field of View
Optional Display (PM030)
Specifications

Take Accurate Readings with the PyroCube XS Infrared Sensor

The PyroCube XS is a range of infrared temperature sensors with tightly focused optics that can measure very small areas.

Applications include measuring individual electronic component temperatures on a circuit board, and plastic welding where the seam is very narrow.

Built-in LED sighting precisely illuminates the exact area being measured by the sensor.

Both models are available with or without a touch screen interface.

Features

Temperature ranges from 50°C to 500°C
Measured spot as small as 0.7 mm
Response time as fast as 10 ms
Continuous LED sighting shows the position and size of the measured spot while readings are being taken
Multilingual touch screen interface (optional)
Not designed or approved for fever detection

Target size and distance are critical to accuracy for most IR thermometers

Diagrams show the diameter of the measured spot at each distance, for 90% energy. The accuracy specifications for the PyroCube sensor are valid up to the maximum distances shown.

Touch Screen Interface

Optional wall-mounted display, data logging, configuration and alarm unit for FibreCube sensor

Read the temperature
The large, bright backlit temperature display is visible from a distance and turns red in an alarm condition.
Record the temperature history
See a graph of the measured temperature, and log more than a year of data to a single MicroSD Card. The data is stored in a simple text format that can be imported easily into Excel.
Configure the sensor
All the sensor’s configuration settings can be adjusted via the intuitive touch screen interface.
Trigger temperature alarms
Two alarms are individually configurable as high, low, band or error. The screen turns bright red to signal an alarm condition, and the built-in 24 V, 1 A relay outputs can be connected directly to alarm sounders and beacons.
Accurate measurements, even with reflections of hot objects
Place the sensor outside an oven or furnace and accurately measure the temperature of objects inside by using the Reflected Energy Compensation feature.

PM030 Specifications
Inputs	1 x FibreCube or PyroCube sensor (any model)
Outputs	Retransmitted analogue output from sensor, and 2 relays, rated 24 V DC, 1 A
Display Format	2.83” (72 mm) resistive touch TFT, 320 x 240 pixels, backlit
Touch Screen Display Format	2.83” (72 mm) resistive touch TFT, 320 x 240 pixels, backlit
Storage	MicroSD Card (optional), max. 32 GB, equal to 16 years of data at the fastest sample rate of 1 per second
Data Logging Interval	1 second to 1 day (configurable)
Internal Clock Batrtery	1 x BR 1225 3V (not included)
Variables Logged	Instantaneous target temperature, hold temperature, alarm events
File Format	.csv
Configurable Parameters (Data Logging)	Sample period Number of samples Scheduled start
Configurable Parameters (Alarm Logging)	Log times when triggered, acknowledged, reset Log data while triggered

Configurable Parameters

Languages English, Chinese (simplified), Japanese

Temperature units °C/°F

Displayed temperature

LED sighting on/of

Password

Date & time (for data logging time stamps)

Peak hold period, decay level

Averaging period

Correction (gain/offset)

Emissivity setting (with teach function)

Reflected energy compensation (with teach function)

Output type

Output temperature range

Polarity on error

Alarm mode, levels, hysteresis

Technical Information
Measurement Specifications
Temperature Range	XSA models: 50°C to 500°C XSB models: 100°C to 500°C Measurements at lower temperatures are possible with reduced stability
Analogue Output Scale	Factory set to: 4 mA = 0°C 20 mA = 500°C Adjustable via optional touch screen module or RS232
Response Time (95%)	XSA models: 10 ms XSB models: 50 ms Adjustable up to 5 s via averaging function
Measured Spot Diameter	From 0.7 mm depending on model and measurement distance (see Field of View Diagrams below)
Target Sighting	Red LED built-in as standard on all models, shows the position and size of the measurement area. Switchable on/off.
Accuracy of Measurement	XSA models: ± 3°C or 1%, whichever is greater XSB models: ± 5°C
Repeatability	XSA models: ± 1°C XSB models: ± 2°C
Temperature Resolution	XSA models: 0.5°C XSB models: 1.5°C
Emissivity Setting	Adjustable, 0.3 to 1.0, via RS232C or optional touch screen interface
Electrical Specifications
Outputs	1 analogue output and 1 alarm output
Analogue Output	4-20 mA (this is the default factory setting on all models) Output type can be changed via optional PM030 touch screen interface to a choice of: 0-20 mA mV/°C Voltage (range depends on model)
Alarm Output	1 open drain alarm output, rated 27 V DC, 0.2 A
Supply Voltage	5 to 27 V DC, 100 mA max
Digital Communications	RS232C Modbus RTU, non-isolated
Output Cable Connector to Sensor	XSA models: Connector built into sensor XSB models: Hardwired
Mechanical Specifications
Weight (without cable)	XSA models: 200 g XSB models: 85 g
Environmental Specifications (PyroCube Sensor)
Environmental Rating	IP67
Operating Ambient Temperature	0°C to 50°C
Storage Temperature	-15°C to 70°C
Operating Ambient Humidity	30% to 85% RH non-condensing

Take Accurate Readings with the PyroCube XS Infrared Sensor

The PyroCube XS is a range of infrared temperature sensors with tightly focused optics that can measure very small areas.

Applications include measuring individual electronic component temperatures on a circuit board, and plastic welding where the seam is very narrow.

Built-in LED sighting precisely illuminates the exact area being measured by the sensor.

Both models are available with or without a touch screen interface.

Features

Temperature ranges from 50°C to 500°C
Measured spot as small as 0.7 mm
Response time as fast as 10 ms
Continuous LED sighting shows the position and size of the measured spot while readings are being taken
Multilingual touch screen interface (optional)
Not designed or approved for fever detection

Calex PyroCube XS - Extremely small targets

Take Accurate Readings with the PyroCube XS Infrared Sensor

Features

Target size and distance are critical to accuracy for most IR thermometers

Touch Screen Interface

PM030 Specifications

Configurable Parameters

Technical Information

Measurement Specifications

Electrical Specifications

Mechanical Specifications

Environmental Specifications (PyroCube Sensor)

Take Accurate Readings with the PyroCube XS Infrared Sensor

Features

Quality Guaranteed

Safe & Secure Payments

Quality Guaranteed