The immersion temperature transmitters TITB / TITS are used for acquiring the temperature of water, liquid or gaseous media (e.g. heating water) in heating, ventilation and air conditioning systems.
The TITB/TITS are active immersion temperature transmitters with
0-10 Vdc or 4-20 mA output.
Features
- Active transmitters 0-10 Vdc or 4-20 mA output
- With or without display
- 8 different temperature ranges in same unit, selectable via jumpers on pcb:
- -20°C to +150°C,
- -50°C to +50°C,
- -20°C to +80°C,
- -30°C to +60°C,
- 0 to +40°C,
- 0 to +50°C,
- 0 to +100°C,
- 0 to +150°C and
- Other temperature ranges on request
- Standard probe/pocket length 100 mm On request 50, 150, 200, 250 or 300 mm probe lenghts
- Pockets in brass (TITB) up to 16 bar / 0 +150°C and pockets in stainless steel (TITS) up to 40 bar / +600°C
- Pocket thread connection G1/2“
- IP65 enclosure with quick locking screws
The power supply for immersion temperature transmitters TITB / TITS with 4-20 mA output is 15-36 Vdc and the power supply for immersion temperature transmitters TITB / TITS with 0-10 Vdc output is 24 Vac/dc.
The active immersion temperature transmitters TITB / TITS with output 0-10 Vdc and 4-20 mA have a PT1000 sensor (DIN EN 60751, class B).
The sensing element for the immersion temperature transmitters TITB / TITS is located in the end of the probe.
Immersion temperature transmitters TITB / TITS have IP65 enclosure.
TITB / TITS immesion temperature transmitters have 4 quick locking screws in the cover of the enclosure.
Wiring connection for immersion temperature transmitters TITB / TITS is inside the ABS plastic enclosure on a terminal block.
The enclosure of immersion temperature transmitters TITB / TITS is supplied with a plastic cable entry gland M 16 x 1.5, including strain relief.
TITB / TITS immersion temperature transmitters can be supplied with or without LCD display.
Standard probe / pocket lenght for immersion temperature transmitters TITB / TITS is 100 mm and on request the immersion temperature transmitters TITB / TITS can be supplied with probe / pocket lenghts 50, 150, 200, 250 and 300 mm.
The probe of immersion temperature transmitters TITB / TITS is made of quality steel.
The immersion temperature transmitters TITB-versions are supplied with brass pocket for operation pressures up to 16 bar and temperature up to 0 +150°C
The immersion temperature transmitters TITS-versions are supplied with stainless steel pocket for operation pressures up to 40 bar and temperature up to +600°C
The pockets of the immersion temperature transmitters TITB /T ITS have G1/2” threaded connector.
